JOBO CPP-3 Processor

JOBO CPP-3 Processor

for all kinds of silver halide films and prints.

The Analogue Photographer
differentiates himself from all digital work. There is no better way to create truly unique pictures, other than by hand-crafted art-work.

Also, schools and colleges who teach photography need reliable equipment to give their students hands-on experience of “real photography”.

The freelance photographer likes to be independent and relies on fast processing results.

The analogue photographer has the choice to fine-tune his processing and printing by using a combination of either film or print processing solutions.

The fine art photographer cares for

instant processing
repeatability in processing
economical usage of chemical solutions, even when sporadically in usage
a complete modular system

JOBO Processor CPP-3 #4083 semi-automates all film and print processing for daylight operation.

All available colour and B/W films on the market can be processed at home, using any chemistry.
Roll films 135, 120; Sheet films 4 x 5 or 8 x 10 inches; Prints up to 20x24” /50 x 60 cm.

Technology of Rotary Processing
Everything you need for consistent, repeatable results are very precisely controlled through

Automatic agitation (rotating in both directions forth and back)
Automatic temperature control
Freshness of chemical solution (one shot processing)
Processing time

This One-Shot Processing method renders highest consistency in processing. This technology was developed by JOBO and applied by thousands of professional and semiprofessional photographers around the world, because the processing results meet the requirements of the film and chemical manufacturers. In fact, JOBO Processors have been employed by film manufacturers in the USA, Germany and Asia for the control of their own film-emulsions.
A versatile processing system to do flexible, creative work with any available formula.

Operation
The JOBO Processor CPP-3 is placed on a solid, levelled table, filled with water from the tap. Mixed processing solutions are held in one litre bottles then positioned in the water-jacket of the processor.

After switching on the heater, working temperature of processing solutions will be ready for use after about 40 min.,

depending on conditions.

The inbuilt timer comes  pre-programmed for standard film processes like E-6, C41 and B/W and can easily be customized by the operator.

The film tank or print drum is connected via a magnetic drive and rotates back and in the same water-jacket, which also

temperature controls the one litre chemical bottles.

Solutions are used in a minimum quantity and are drained after use because the rotating tank and drum requires a minimum

amount of solution, as is needed for the chemical process. However each solution can be recovered separately.

Once the exposed material is loaded in one of the JOBO Tanks or Drums, (this must be done in complete darkness) they are placed on the Processor, which immediately rotates them in the temperature controlled water-bath.

For changing working solutions, the JOBO Tank or Drum is disconnected
from the magnetic drive, as the motor continues to rotate and they can be poured out and re-filled  through the tank lid.

By adding JOBO Lift  #4072 this procedure can be simplified.
Working solutions are filled in through a wide funnel of the Lift and drained
easily by operating a lever, which raises the film tank or print drum for emptying the solutions. This provides exact timing of

each process step.
Large size prints and films are soaked evenly.

For controlling processing times, the built-in programmable timer sounds
an audible alarm, when chemical solutions need to be replaced.

After the final wash, the developing material needs to be taken out of the film
tank or print drum for drying out of the processor.

Accessories
The JOBO tank series 1500 and 2500 is a modular system. Tank capacities can be enlarged with an extension module and

each inversion tank can be modified for rotary processing on the bottom with magnet item 1504 for use on CPP-3.

When used with the Lift, the lid of the tank needs to be equipped with a cog, item 1505.

Tank system 1500 is based on narrow gauged reels to reduce chemistry consumption.
Tank system 2500 uses wider gauged reels and accepts sheet film reels as well.
Expert drums are for sheet films only and always come with cog lid for use on the Lift.
For print processing we recommend Drum system 3000 but the older style 2800 can also be used.

JOBO CPP-3 is compatible with all JOBO Tanks of series 1500, 2500 and all JOBO Drums of series 2800 and 3000. For use in

rotation they must be equipped with magnet # 1504 or cog # 1505.
Expert Drums

Required accessories:

Foot Pump # 3360 to open tanks after processing.

Sponge Rod # 3007 for drying

Expert Drums # 3006 and # 3010 (included with drum).

Sponge Rod # 3008 for drying

Expert Drums # 3004 and 3005 (included with drum).

JOBO Tank System 1500

For rotary processing: each tank must be fitted with magnet # 1504 or cog # 1505.

35mmTank
# 1510 comes with
1 reel # 1501 capacity: 1 film 135. Minimum solution amount 140 ml for rotary or 250ml for inversion agitation.

Universal Tank

# 1520 comes with 1 reel 1501.

Multi Tank

# 1540 comes with 1 reel 1501.

Extension Module
# 1530 for all tanks System 1500  comes with axle tube.
Extends capacity for 3 films 135 and up to 4 films 120.
Minimum solution amount is
330ml. for rotary, 725ml. for inversion.

Film Reel Duo-set      1500 adjustable
# 1501 adjustable, for 1 film 135 or up to 2 films 120.
The red film separating clip allows loading the reel with 2 films 120
and prevents them from overlapping each other.

JOBO Tank System 2500

For rotary processing, each tank must be fitted with magnet # 1504 or cog # 1505.


Multitank 1
  
# 2540 comes w/o reel.

Multitank 2

# 2520 universal tank for roll and sheet films comes w/o reel #2502, # 2521 comes with magnet,
# 2523 comes with cog lid.

Multitank 5
# 2550 universal tank for roll- and sheet films, comes w/o reel.
Fitted with 5 reels, 2502 for max 5 films 135 or 6 films 120: minimum solution amount 640 ml.
Or fitted with 2 reels, 2509n max. 12 sheets 4x5”: min. chemical volume 560 ml.

Film Reel Duoset 2500
# 2502 adjustable, for 1 film 135 or up to 2 films 120.
The red film separating clip allows loading the reel with 2 films 120 and prevents them from overlapping each other.

Sheetfilm Reel Uni
# 2509n for processing sheet film in Tank System 2500
Adjustable for 6 sheets 6x9cm or 9x12cm or 4x5”

Printdrums

Expert Drum # 3010 holds 10 sheets up to 4x5” min/max-chem.-vol. 210ml-330m.l

Expert Drum # 3005 holds 5 sheets up to 8x10” min/max-chem.-vol. 270ml-630ml.

Multi Drum 20x24“
# 3063 for up to 1 sheet 20”x24”/ 50x60 cm: min. chem. vol. 300 ml.

Film Force Washer Cascade
# 3350 in combination with all JOBO tanks in use for inversion agitation.
Saves water, reduces washing time to 5 min., water flow can be adjusted.
The universal adaptor fits almost all water taps.

JOBO Scaled Bottles

With special sealing cap, scales in steps of 100ml.

JOBO Roller Base
# 1509 accepts all JOBO Tanks except 2510.
The inversion tank lays horizontal on the rollers and is agitated by hand. It allows reduction of working solution. Processing is conducted at room temperature.

CPP-3 #4083 includes the following accessories:
6 solution bottles, scaled, 1000 ml
4 graduates, 260ml
1 adjustable roller bases
1 JOBO Film tank 2520
2 reels 2501 

한번 도전해 볼까 함